NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
1-2 About This Guide
202-10088-01, March 2005
Chapter 10, “Routing Commands” describes the Routing commands.
Chapter 11, “Quality of Service (QoS) Commands” describes the QOS commands.
Chapter 12, “Managing Switch Stacks” describes the switch stacking.
Note: Refer to the release notes for the 7000 Series L3 Managed Switch Software application
level code. The release notes detail the platform specific functionality of the Switching, Routing,
SNMP, Config, Management, and Bandwidth Provisioning packages.
Typographical Conventions
This guide uses the following typographical conventions:
Special Message Formats
This guide uses the following formats to highlight special messages:
This manual is written for the 7300S Series L3 Switch according to these specifications:
Table 1. Typographical conventions
italics Emphasis.
bold User input.
[Enter] Named keys in text are shown enclosed in square brackets. The notation [Enter]
is used for the Enter key and the Return key.
[Ctrl]+C Two or more keys that must be pressed simultaneously are shown in text linked
with a plus (+) sign.
SMALL CAPS
DOS file and directory names.
Note: This format is used to highlight information of importance or special interest.
Table 1-1. Manual Specifications
Product Version NETGEAR 7300S Series Layer 3 Managed Switch
Manual Publication Date March 2005