NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-6 Routing Commands
202-10088-01, March 2005
show arp brief
This command displays the brief Address Resolution Protocol (ARP) table information.
Format
show arp brief
Mode Privileged EXEC
Age Time (seconds) Is the time it takes for an ARP entry to age out. This value was
configured into the unit. Age time is measured in seconds.
Response Time (seconds) Is the time it takes for an ARP request timeout. This value
was configured into the unit. Response time is measured in sec-
onds.
Retries Is the maximum number of times an ARP request is retried. This
value was configured into the unit.
Cache Size Is the maximum number of entries in the ARP table. This value
was configured into the unit.
Dynamic Renew Mode Displays whether the ARP component automatically attempts to
renew dynamic ARP entries when they age out.
Total Entry Count Current / Peak Field listing the total entries in the ARP table and the
peak entry count in the ARP table.
Static Entry Count Current / Max Field listing the static entry count in the ARP table and
maximum static entry count in the ARP table.
IP Routing
This chapter provides a detailed explanation of the IP Routing commands. The commands are
divided by functionality into the following different groups:
Show commands are used to display switch settings, statistics and other information.
Configuration Commands are used to configure features and options of the switch. For every
configuration command there is a show command that will display the configuration setting.
Copy commands are used to transfer configuration and informational files to and from the
switch.
routing
This command enables routing for an interface.