NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-14 Routing Commands
202-10088-01, March 2005
Mode Privileged EXEC
Network Address Is a valid network address identifying the network on the speci-
fied interface.
Subnet Mask Is a mask of the network and host portion of the IP address for the
attached network.
Protocol Tells which protocol added the specified route. The possibilities
are: local, static, or RIP.
For each Next Hop
Next Hop Interface The outgoing router interface to use when forwarding traffic to
the next destination.
Next Hop IP Address The outgoing router IP address to use when forwarding traffic to
the next router (if any) in the path toward the destination.
Preference
The metric value that is used for this route entry.
Metric
show ip route preferences
This command displays detailed information about the route preferences. Route preferences are
used in determining the best route. Lower router preference values are preferred over higher router
preference values.
Format
show ip route preferences
Mode Privileged EXEC and User EXEC
Local This field displays the local route preference value.
Static
This field displays the static route preference value.
RIP This field displays the RIP route preference value.
show ip stats
This command displays IP statistical information. Refer to RFC 1213 for more information about
the fields that are displayed. This command takes no options.
Format
show ip stats
Mode Privileged EXEC and User EXEC