NETGEAR 7300S Network Router User Manual


 
User Manual for the NETGEAR 7300S Series Layer 3 Managed Switch Software
10-28 Routing Commands
202-10088-01, March 2005
redistribute
This command configures RIP protocol to redistribute routes from the specified source protocol/
routers. There are five possible match options. When you submit the command redistribute match
<match-type> the match-type or types specified are added to any match types presently being
redistributed. Internal routes are redistributed by default.
Default metric -- not-configured; match -- internal
Format for other source protocol
redistribute {bgp | static | connected} [metric <0-
15>]
Mode Router RIP Config
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Format
no redistribute {bgp | static | connected} [metric]
[match [internal]
Mode Router RIP Config
show ip rip
This command displays information relevant to the RIP router.
Format
show ip rip
Mode Privileged EXEC and User EXEC
RIP Admin Mode
Select enable or disable from the pulldown menu. If you select
enable RIP will be enabled for the switch. The default is disable.
Split Horizon Mode Select none, simple or poison reverse from the pulldown menu.
Split horizon is a technique for avoiding problems caused by
including routes in updates sent to the router from which the route
was originally learned. The options are: None - no special pro-
cessing for this case. Simple - a route will not be included in
updates sent to the router from which it was learned. Poisoned
reverse - a route will be included in updates sent to the router
from which it was learned, but the metric will be set to infinity.
The default is simple