Filter
Top Products
IP routing configuration using the CLI 103
<prefix_list> Indicates a previously defined prefix list to be used with the
command. This parameter is used with various options in
this command.
<protocol_name> The name of a protocol to be used. Options are direct, static,
rip, ospf, and any. Multiple protocols can be specified by
using a comma-separated list.
<route_type>
A route type to be used. Options are any, external, external-1,
external-2, internal, and local.
<new_map_name>
A new name to be assigned to a previously configured route
map.
<ip_address> An IP address and subnet mask to be used.
<metric_value> Indicates the value of the metric to be used while sending an
update for routes. This is an integer value between 0 and
65535.
<metric_type> Indicates the metric type for routes to be imported into the
OSPF routing protocol. Options are type1 and type2.
The route-map command is executed in the Global Configuration mode.
ip rip in-policy command
The ip rip in-policy command is used to specify a RIP Accept (In)
policy for an interface. This policy takes the form of a previously configured
route map.
The syntax of the ip rip in-policy command is:
ip rip in-policy <rmap_name>
The <rmap_name> parameter represents the name of a previously
configured route map.
The ip rip in-policy command is executed in the Interface
Configuration mode.
ip rip out-policy command
The ip rip out-policy command is used to specify a RIP Announce
(Out) policy for an interface. This policy takes the form of a previously
configured route map.
The syntax of the ip rip out-policy command is:
ip rip out-policy <rmap_name>
The <rmap_name> parameter represents the name of a previously
configured route map.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.