Filter
Top Products
IP routing configuration using the CLI 73
ip rip listen {enable}
The ip rip listen command is executed in the Interface Configuration
mode.
no ip rip listen command
The no ip rip listen command is used to prevent this interface from
listening for RIP advertisements.
The syntax of the no ip rip listen command is:
ip rip listen {enable}
The no ip rip listen command is executed in the Interface
Configuration mode.
ip rip out-policy command
The ip rip out-policy command is used to add an out policy to this
RIP interface.
The syntax of the ip rip out-policy command is:
ip rip out-policy <policy_name>
The <policy_name> parameter represents the name of a previously
configured switch policy.
The ip rip out-policy command is executed in the Interface
Configuration mode.
no ip rip out-policy command
The no ip rip out-policy command is used to remove an out policy
from the RIP interface.
The syntax of the no ip rip out-policy command is:
no ip rip out-policy <policy_name>
The <policy_name> parameter represents the name of a previously
configured switch policy.
The no ip rip out-policy command is executed in the Interface
Configuration mode.
ip rip poison command
The ip rip poison command is used to enable poison reverse on this
RIP interface.
The syntax of the ip rip poison command is:
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.