Filter
Top Products
IP routing configuration using the CLI 91
no redistribute parameters
Parameters Description
<route_type>
The type of route to be configured. Valid options are
direct, rip, and static.
<policy_name> The route policy to remove from the route redistribution.
This is the name of an existing route policy.
The no redistribute command is executed in the Router Configuration
mode.
rfc1583-compatibility command
The rfc1583-compatibility command is used to enable compatibility
for RFC 1583 in the switch OSPF implementation.
The syntax of the rfc1583-compatibility command is:
rfc1583-compatibility enable
The rfc1583-compatibility command is executed in the Router
Configuration mode.
no rfc1583-compatibility command
The no rfc1583-compatibility command is used to disable
compatibility for RFC 1583 in the switch OSPF implementation.
The syntax of the no rfc1583-compatibility command is:
no rfc1583-compatibility enable
The no rfc1583-compatibility command is executed in the Router
Configuration mode.
router-id command
The router-id command is used to set the identifier to the user-configured
router ID, which is expressed in the form of an IP address.
The syntax of the router-id command is:
router-id <router_id>
The <router_id> parameter is used as the unique identifier for the router.
The router-id command is executed in the Router Configuration mode.
no router-id command
The no router-id command is used to reset the router ID to 0.0.0.0.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.