Filter
Top Products
276 IP Routing Configuration and Management
—End—
RIP In and Out Policy configuration
The RIP In/Out Policy tab is used to configure RIP accept and announce
policies on switch interfaces. To configure these policies, follow this
procedure:
Step Action
1
Select IP Routing > Policy from the Device Manager menu. The
Policy dialog opens with the Prefix List tab selected. Select the RIP
In/Out Policy tab. This tab is illustrated below.
Policy dialog - RIP In/Out Policy tab
2
Using the fields provided, configure the RIP policies. These fields
are described in the following table.
RIP In/Out Policy tab fields
Field Description
Address The address of the RIP interface.
Interface The associated switch interface.
InPolicy A previously configured policy that will be used as the
accept policy on this interface.
OutPolicy A previously configured policy that will be used as the
announce policy on this interface.
3
Click Apply.
—End—
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.