Filter
Top Products
IP routing configuration examples 151
External route advertisement example
The following procedure outlines the commands used to replicate the above
configuration example:
Step Action
1
Configure the RIP interface.
Configure port 1/20 as a brouter port in VLAN 200 and enables RIP
on this interface.
5530-24TFD(config)# interface fast 1/20
5530-24TFD(config-if)# brouter port 1/20 vlan 200
subnet 20.1.1.2/30
5530-24TFD(config)# router rip
5530-24TFD(config-router)# network 20.1.1.2
2
Globally enable RIP and configure a RIP interface for RIP version 2.
5530-24TFD(config)# router rip enable
5530-24TFD(config)# interface vlan 200
5530-24TFD(config-if)# ip rip receive version rip2 send
version rip2
3
Configure the OSPF interface.
Configure port 2/6 as a brouter port.
5530-24TFD(config)# interface fast 2/6
5530-24TFD(config-if)# brouter port 2/6 vlan 100 subnet
10.1.1.18/30
4
Enable OSPF.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.