Filter
Top Products
286 IP Routing Configuration and Management
2
Select Edit > Port from the Device Manager menu. The Port dialog
opens with the Interface tab selected. Select the IP Address tab.
This tab is illustrated below.
Port dialog - IP Address tab
3 Use the provided fields to view the brouter port settings. These fields
are outlined in the following table.
IP Address tab fields
Field Description
IpAddress The IP address assigned to this brouter.
NetMask The subnet mask associated with the brouter
IP address.
BcastAddrFormat The IP broadcast address format used on this
interface.
ReasmMaxSize The size of the largest IP datagram which
this entity can reassemble from incoming
IP fragmented datagrams received on this
interface.
VlanId The VLAN ID associated with this brouter port.
MacOffset The MAC address offset associated with this
brouter port.
—End—
Creating a Brouter port
To create a new brouter port, use the following procedure:
Step Action
1
Select a port on the Device Manager Front Panel view.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.