Filter
Top Products
IP routing 43
These commands must be executed in the Global Configuration command
mode.
Interface DHCP relay configurations These configurations are
associated with the L3 VLAN that the client or server resides on. IP routing
must be enabled and a valid IP address must be assigned to the L3 VLAN
before it generates the default settings for DHCP relay.
"Interface DHCP relay commands" (page 43)describes the interface DHCP
relay commands. To change the interface DHCP relay configurations, switch
to the Interface Configuration command mode.
Interface DHCP relay commands
Command
Description
show vlan dhcp-relay shows vlan dhcp relay state
ip dhcp-relay min-sec 30 sets min-sec to 30
ip dhcp-relay mode dhcp sets mode to dhcp
no ip dhcp-relay disables ip dhcp-relay
ip dhcp-relay broadcast enables broadcast for this interface
DHCP Relay forward path configurations These configurations are
made per interface IP address and server IP address. " DHCP relay forward
path commands" (page 43)DHCP relay forward path commands table
describes the ip dhcp relay fwd-path commands.
DHCP relay forward path commands
Command
Description
show ip dhcp-relay fwd-path Shows ip dhcp-relay fwd-path.
ip dhcp-relay fwd-path
<agent IP> <server IP>
mode bootp-dhcp
Creates interface IP and server IP path with
modes DHCP & BootP.
ip dhcp-relay fwd-path
<agent IP> <server IP>
disable
Disables the interface/server pair, enable =
false.
no dhcp-relay fwd-path
<agent IP> <server IP>
Deletes the interface/server pair.
no ip dhcp-relay Disables ip dhcp-relay.
ip dhcp-relay broadcast Enables broadcast for this interface.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.