Filter
Top Products
78 IP Routing Configuration and Management
default timers basic update command
The default timers basic update command is used to return the
switch to the factory default RIP update timer.
The syntax of the default timers basic update command is:
default timers basic update
The default timers basic update command is executed in the
Router Configuration mode.
default-metric command
The default-metric command is used to set the default RIP metric
value.
The syntax of the default-metric command is:
default-metric <metric_value>
The <metric_value> parameter is an integer value between 0 and 15.
The default-metric command is executed in the Router Configuration
mode.
default ip rip advertise-when-down command
The default ip rip advertise-when-down command is used to
restore the default RIP advertise when down setting for the interface
(disabled).
The syntax of the default ip rip advertise-when-down command
is:
default ip rip advertise-when-down enable
The default ip rip advertise-when-down command is executed in
the Interface Configuration mode.
default ip rip auto-aggregation command
The default ip rip auto-aggregation command is used to restore
the default RIP auto aggregation setting for the interface (disabled).
The syntax of the default ip rip auto-aggregation command is:
default ip rip auto-aggregation enable
The default ip rip auto-aggregation command is executed in
the Interface Configuration mode.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.