Filter
Top Products
216 IP Routing Configuration and Management
2
Click Insert. The Insert ARP Entry screen opens. This screen
is illustrated below.
Insert ARP Entry screen
3
To determine the interface and VLAN to use for the ARP entry, do
the following:
a. Select a VLAN from the Port in VLAN drop down list.
b. Using the provided dialog, select the ports that will be used in
this entry.
c. The Interface field will be populated with the appropriate VLAN
/ interface information.
4
In the fields provided, enter the remainder of the required information
for the new ARP entry. These fields are outlined in the following table.
Insert ARP Entry fields
Field Description
MacAddress The unique hardware address of the device.
IpAddress The IP address of the device used to represent
a point of attachment in a TCP/IP internetwork.
5 Click Insert. The ARP tab is displayed with the new entry.
—End—
ARP Interfaces tab
The ARP Interfaces tab is used to configure proxy ARP on the switch.
Proxy ARP allows the switch to respond to an ARP request from a locally
attached host (or end station) for a remote destination.
To configure proxy ARP, use the following procedure:
Step Action
1
Select IP Routing > IP from the Device Manager menu. The IP
dialog opens with the Globals tab selected.
2
Select the ARP Interfaces tab. This tab is illustrated below.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.