Filter
Top Products
IP routing configuration using the Java Device Manager 235
3
Click Apply.
—End—
Interface configuration
The Interfaces tab of the OSPF dialog is used to configure OSPF interfaces.
To configure OSPF interfaces, use the following procedure:
Step Action
1
Select IP Routing > OSPF from the Device Manager menu. The
OSPF dialog will open. Select the Interfaces tab. This tab is
illustrated below.
OSPF dialog - Interfaces tab
2
Using the fields provided, configure the OSPF interface. These fields
are described in the table below.
Interfaces tab fields
Field Description
IpAddress The IP address of the OSPF interface.
AreaId The unique ID of the area to which the
interface connects. Area ID 0.0.0.0 indicates
the OSPF backbone.
AdminStat The administrative status of the OSPF
interface.
State Correct DR state of the OSPF interface (DR,
BDR, OtherDR).
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.