Filter
Top Products
IP routing configuration using the CLI 117
ip dhcp-relay fwd-path parameters
Parameter Description
<A.B.C.D> Enter the IP address of the DHCP agent on the
forwarding path to be configured.
<O.P.Q.R> Enter the IP address of the DHCP server on the
forwarding path to be configured.
The ip dhcp-relay fwd-path command is executed in the Global
Configuration command mode.
The DHCP relay feature is enabled by default, and the default mode is
BootP-DHCP.
ip dhcp-relay fwd-path enable command
The ip dhcp-relay fwd-path enable command enables the specific
DHCP forwarding path globally on the Nortel Ethernet Routing Switch 5500
Series.
The syntax for the ip dhcp-relay fwd-path enable command is:
ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R> enable
The following table describes the parameters for this command.
ip dhcp-relay fwd-path enable parameters
Parameter Description
<A.B.C.D> Enter the IP address of the DHCP agent on the
forwarding path to be enabled.
<O.P.Q.R> Enter the IP address of the DHCP server on the
forwarding path to be enabled.
The ip dhcp-relay fwd-path enable command is executed in the
Global Configuration command mode.
The DHCP feature is enabled by default.
ip dhcp-relay fwd-path disable command
The ip dhcp-relay fwd-path disable command disables the
specific DHCP forwarding path globally on the Nortel Ethernet Routing
Switch 5500 Series.
The syntax for the ip dhcp-relay fwd-path disable command is:
ip dhcp-relay fwd-path <A.B.C.D> <O.P.Q.R> disable
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.