Filter
Top Products
234 IP Routing Configuration and Management
Step Action
1
Select IP Routing > OSPF from the Device Manager menu. The
OSPF dialog opens.
2
Select the Areas tab.
3
Select an AreaID to delete.
4
Click Delete.
—End—
Stub Area Metrics configuration
The Stub Area Metrics tab of the OSPF dialog is used to configure stub
area metrics associated with different types of service. To configure these
parameters, use the following procedure:
Step Action
1
Select IP Routing > OSPF from the Device Manager menu. The
OSPF dialog will open. Select the Stub Area Metrics tab. This tab
is illustrated below.
OSPF dialog - Stub Area Metrics tab
2
Using the fields provided, configure the stub area metrics. These
fields are described in the table below.
Stub Area Metrics tab fields
Field Description
AreaId The unique ID of the stub area.
TOS The Type of Service associated with the metric.
Metric The metric value applied to the indicated type of
service. By default, this equals the least metric at the
type of service among the interfaces to other areas.
Status Displays the status of the entry; Active or Not Active.
This field is read-only.
Nortel Ethernet Routing Switch 5500 Series
Configuration-IP Routing Protocols
NN47200-503 03.01 Standard
5.1 27 August 2007
Copyright © 2005-2007, Nortel Networks
.