Filter
Top Products
Chapter 3. Command Reference
______________________________________________________________________________
______________________________________________________________________________
TC9450PM Rev. C 8/11/98 3-3
Syntax Conventions
Following is the structure of an RCL command. This general syntax does not apply
to the {W command.
NOTE: Each command (except {W) begins and ends with a caret character (^). A
split vertical bar (¦) separates each field in the commands.
^Cmd_ltr¦field_1¦...¦field_n¦^space comment
Field Description
^ Starting token.
cmd_ltr Command letter.
field_1 ...
field_n
Optional. Fields supplying information to the command. Not
all commands have these fields. When you need to use the
following characters in these fields, substitute the
corresponding sequence instead.
Character Sequence
Split vertical bar (¦) ~124
Caret (^) ~094
Left Brace ({) ~123
Tilde (~) ~126
Sometimes the instructions say to leave the field blank. To do
so, enter only a split vertical bar.
^ Ending token.
space A space character (required if you specify a comment).
comment Optional. Enter any comment between this point and the end
of the line.
NOTE:All RCL commands (except {W and ^P) must fit on one line. Sometimes
they appear on two lines in this manual due to space limitations.