Filter
Top Products
RASCAL Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
3-10 TC9450PM Rev. C 8/11/98
Syntax
^O¦mode¦^
mode C Continuous mode
D On-demand mode
Example
^O¦D¦^
This command sets the printer to on-demand mode.
Print (^P)
The Print command prints a batch of labels using a specified format.
NOTE:If the printer battery loses power, replace the battery. The printer
remembers the last batch. However, if you replace the battery without
power loss, you’ll lose the batch.
Syntax
^P¦identifier¦quantity¦field_1¦...¦field_n¦^
identifier
The format identifier.
quantity
The number of labels to print (1 to 9999).
If you are using on-
demand mode, the quantity must be two or greater.
field_1 ...
field_n
The data for each field in the format. Provide data in the same
order as the format definition.
Text fields can contain up to 200 characters, including a carriage
return, line feed, or carriage return/line feed combination. A
carriage return, line feed, or carriage return/line feed combination
creates a new line. For example, Joe’s<CR>Groceries appears as:
Joe’s
Groceries.