Filter
Top Products
RASCAL Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
3-16 TC9450PM Rev. C 8/11/98
data_attrib
The field attributes.
0 The field is a line, graphic, or a variable text or bar
code that neither increments nor decrements.
1* The field data never changes (text).
2*# Incrementing field (text or bar code).
3* Decrementing field (text or bar code).
* These fields require you to enter something in the fixed_data
field.
# Do Not use an MSI bar code with an incrementing text field.
This combination may cause the check digit on the MSI bar code
to be incorrect.
fixed_data
If the field never changes, enter up to 200 bytes of data in this
field. Or, if it is an incrementing or decrementing field, enter
the starting number in this field. Otherwise, leave it blank (but
remember to include the split vertical bar).
NOTE: Except for the one incrementing or decrementing
field per format, you cannot use this field for a bar
code.
A carriage return, line feed, or carriage return/line feed
combination in the field data creates a new line. For example,
suppose the data is Joe’s<CR>Groceries. On the label, it
appears as:
Joe’s
Groceries.
Example
^R¦1¦R¦50¦50¦10¦35¦0¦0¦0¦10¦4¦4¦0¦0¦¦^
This command defines a field that is 10 dots wide and 35 dots long at point (50,50).
This field is fixed, left-justified, and not rotated. Also, this field uses font 10 and is
4 times as wide and high than normal.