Filter
Top Products
RASCAL Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
3-8 TC9450PM Rev. C 8/11/98
Example
^L¦F¦109¦^
This command informs the printer it is using indexed supplies and sets the vertical
print position to 109. It also prints a blank label..
Library Management (^l)
The Library Management command
• adds black and white .PCX graphics to the printer library.
• deletes all graphics, fonts, formats, and fields from the printer library
(except font 16). You must delete a font library before replacing it.
• takes inventory of the printer library. The printer responds with the
Library Inventory response described in Chapter 4, “Response
Reference.”
NOTE:The letter for this command is a lowercase letter l, not the number one.
To download a graphic, use any communications program. For example, if you use
the DOS MODE and COPY commands, you would:
1. Set your PC communication parameters and serial port with the MODE
command.
2. Download the ^l command to the serial port using the COPY command.
3. Download the .PCX file to the serial port. If you use COPY, be sure to include
the /b switch.
NOTE:When downloading a graphic, be sure not to interrupt the previous
procedure or send a graphic that exceeds the space alotted. Either of these
conditions may lock the printer. To unlock the printer, send the ENQ
character to the printer or remove and reattach the printer’s battery.