Filter
Top Products
9450 Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
ii TC9450PM Rev. C 8/11/98
Terms to Know
Review the following list of terms before you read this manual.
Batch Data stream containing information specifying the
format, the number of copies, and the data for printing.
Continuous mode Operation mode in which the printer dispenses labels in
a continuous strip.
Data stream Sequence of one or more RCL commands.
Decrementing fields Fields where data decreases by one for each label in a
batch.
Dot Smallest unit of print on a label. A dot is 1/203rd of an
inch on the printer. You measure it across the width of
the printhead.
Field Area containing data on a format.
Format Layout of the printed label, containing one or more
fields.
Incrementing fields Fields where data increases by one for each label in a
batch.
Indexed supplies Supplies with pre-printed black marks or apertures on
them. The printer detects these marks or apertures to
determine proper supply registration. Non-indexed
supplies do not have these marks or apertures.
Length axis Length of a format measured in the feed direction. Use
this axis to position a field up or down on a supply. The
maximum length is 1015 dots (5 inches).
On-demand mode Operation mode in which the printer dispenses labels
one at a time. The operator must press [Feed] to print
each one.
Sleep mode The printer enters a low power state when it has been
inactive for a specified period of time. It “awakens”
when it receives a transmission or the operator presses
[ON/OFF]. See the Operator’s Handbook for more
information.