Filter
Top Products
RASCAL Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
3-6 TC9450PM Rev. C 8/11/98
Clear Error Status (^C)
The Clear Error Status command clears batch errors from memory. In general,
batch errors involve software problems (e.g., invalid commands or bad data).
Correct the error, send this command (or press [Feed]), and continue operation.
System errors involve hardware or operation problems (e.g., low battery, out of
paper). The printer clears system errors automatically when you correct the
condition.
See "Status Flags" and "Clearing Status Bits" in Chapter 4, “Response Reference”
for more information.
Syntax
^C¦^
Delete Batches (^F)
The Delete Batches command removes the current batch after it prints the next
complete label or removes all batches immediately. To remove the current batch
manually, press [Feed] for 3-5 seconds.
Syntax
^F¦function¦^
function A Remove all batches
C Remove the current batch
Example
^F¦A¦^
This command removes all batches from the printer.