Filter
Top Products
RASCAL Programmer’s Manual
______________________________________________________________________________
______________________________________________________________________________
3-20 TC9450PM Rev. C 8/11/98
Adjust Print Contrast (^tavg)
The Adjust Print Contrast command lightens or darkens the print by a specified
percentage from the printer’s default setting.
Syntax
^tavg¦direction¦percentage¦%¦^
direction
Adjustment direction.
+ Darkens the print
- Lightens the print
percentage
Adjustment percentage. If you’re darkening the print, enter a
number from 1-35. If you’re lightening the print, enter a number
from 1-15. To return the print contrast to the default setting,
enter 0.
Example
^tavg¦+¦35¦%¦^
This command darkens the print by 35 percent.
Font Download ({W)
The Font Download command sends information about new fonts to the printer.
You can also use the Monarch Download Utility to download fonts.
NOTE:If you download a font that is greater than 32K, the printer will reject the
download.
This command is only for new fonts. If you want to download a font using a
number of an existing font, you must delete the existing font first. The standard
fonts that the printer comes with are described in Chapter 2, “Fields and Formats.”
Call sales at the number on the back of this manual to obtain new fonts for the
printer, to see if any fonts you have work with the printer, or to order the Download
Utility.