Polycom 6.1 Projector User Manual


 
47
Fig. 4-100
The Add and Edit screens contain four fields that should be completed as follows:
Base URL: The Base URL is the location of the web server that will be
distributing the web content being called by the encoder receiving relayed
instructions.
Replace URL: The Replace URL is the location of the web server that the origin
encoder is using but that is being replaced by the Base URL so that the second
encoder can receive different web content.
Address: The IP Address of the relayed encoder.
Port: The Port that will be used to communicate with the relayed encoder.
Click Save (See Figure 4-101).
Fig. 4-101
4.12.5 Initiating the PE-Controller Service
Once the PE-Controller fields have been completed, the “service” must be
initiated on the encoder. To initiate the service:
1. Launch the Control Panel on the encoder and click Administrative Tools.
2. After clicking Administrative Tools, click Services. Within the Services
directory, click PEController.
3. The PE Controller Local Properties window will appear (See Figure 4-102).