Filter
Top Products
91
8
8. Launching A Presentation
8.1 Launching A Presentation
To launch a presentation, click Start on the right hand side of the Presentation
Manager (See Figure 8-1).
Fig. 8-1
Clicking “Start” will automatically connect the Presentation Manager to the FTP
server designated in the Presentation Wizard. A proper connection to the FTP
server will be indicated by a green light at the bottom-left of the Presentation
Manager (See Figure 8-2). If multiple publishing points are being used, multiple
green lights should appear.
Note: The encoder lights will turn green if the encoder connection is working. In
the example picture below, the encoders are red and, consequently, the presenter
can tell that encoder is not connected.
Fig. 8-2
Note
:
The Presentation Manager will not
display “connected” if the presentation
is being prepared for CD only, as a FTP
connection is not required to publish the
presentation.
As soon as Start is clicked, the timer will begin recording for the duration of the
presentation and the “Event List” window will begin recording each event and the
time at which it occurred (See Figures 8-3 and 8-4).
Fig. 8-3 Fig. 8-4