Polycom 6.1 Projector User Manual


 
86
Fig. 6-3
Note:
Encoding time offsets can be
altered prior to or during a
live presentation.
Once the desired offsets have been entered, click Apply to apply the time offset
and to keep the “Time Offset” window open or OK to apply the time offset and to
return to the Presentation Manager.
6.2.3 Auxiliary Media Time Offset
Accordent PresenterPRO enables a presentation to be synchronized with non-
streaming media, including phone bridges and closed circuit television. Since
encoding is not required to disseminate this media, the delay between the creation
and receipt of the media by the audience is generally much smaller.
Consequently, an additional link can be created for the audience members that
will be receiving the audio or video portion of the presentation via a non-
streaming media format.
To set an auxiliary media type encoding offset, enter the desired offset in the
“Auxiliary” field (See Figure 6-4).
Fig. 6-4
Once an offset has been entered into the “Auxiliary” field, click Apply or OK.
6.2.4 In-Band Distribution
If Use Encoder Control was highlighted on the “Media-Info” page, the streaming
and non-streaming content will be bound at the encoder and delivered as a single
piece of content.
If the PE-Controller was previously configured (See Section 4.12.4) and the “Use
Encoder Control” and related fields were completed in the Presentation Wizard
(See Section 4.12.6), then no additional preparation needs to be performed. The
encoders (and the presentations) will launch as soon as “Start” is clicked in the
Presentation Manager.