Polycom 6.1 Projector User Manual


 
53
Enable: Highlight the “Enable” field to enable the closed captioning encoder to
be started and stopped using Accordent PresenterPRO.
Address: Enter the address of the encoder. The default “loop back” address is
typically “127.0.0.1”.
Port: Enter the Port that the encoder is using.
Password Field: Enter the password that was entered in the PE-Controller to
access the encoder.
Video Source: Use the “Video Source” drop down menu to select the device that
will be used to create the closed captioning content.
Enable Archive: Highlight the “Enable Archive” field to instruct the encoder to
create an archived closed captioning file.
Archive File Name: Enter a name for the archived closed captioning file. The
file suffix should be “.rt” for RealText.
Archive Folder Path: Enter a location where the archived file will be stored after
it is created.
After completing the “CC Encoder Settings” screen, click OK (See Figures 4-121
and 4-122).
Fig. 4-121 Fig. 4-122
4.12.8 Testing the Encoder
If using the in-band encoding method, you can test your encoding information to
ensure they are correct. At the bottom of the Streaming Info page there is a Start
Encoder Test (See figure 4-123).