Filter
Top Products
A – Command Line Interface
Show Command
59022-04 B A-45
post log
Displays the Power On Self Test (POST) log which contains results from the
POST.
setup [option]
Displays setup attributes for the system, SNMP, and the switch manufacturer.
Refer to the Show Setup Command on page A-61.
steering [domain_id]
Displays the routes that data takes to the switch given by [domain_id]. If you omit
[domain_id], the system displays routes for all switches in the fabric.
support
Executes a series of commands that display a complete description of the switch,
its configuration, and operation. The display can be captured from the screen and
used for diagnosing problems. This keyword is intended for use at the request of
your authorized maintenance provider. The commands that are executed include
the following:
■ Date
■ Alias List
■ Config List
■ Date
■ History
■ Ps
■ Show (About, Alarm, Backtrace, Chassis, Config Port, Config Switch, Dev,
Dev Settings, Domains, Donor, Fabric, Log, Log Settings, Lsdb, Mem, Ns,
Perf, Port, Setup Mfg, Setup Snmp, Setup System, Steering, Switch,
Topology, Users)
■ Uptime
■ User Accounts
■ Whoami
TotalTxWords Total number of words issued by this port.
TxLinkResets Number of Link Resets issued by this port.
TxOfflineSeq Total number of Offline Sequences issued by this port.
TxWait Time waiting to transmit when blocked with no credit.
Measured in FC Word times.
Table A-13. Show Port Parameters (Continued)
Entry Description