Filter
Top Products
2 – Using SANbox Manager
Changing Default File Password
2-8 59022-04 B
2. Double-click the uninstall program file or shortcut/link, and follow the
instructions to uninstall the SANbox Manager application.
2.5
Changing Default File Password
To change the password for the default fabric view file, do the following:
1. Open the File menu and select Change Default File Password to open the
Set New Password window as shown in Figure 2-5.
Figure 2-5 Set New Password Window
2. Enter the new password in the Default File Password field.
3. Re-enter the same password in the Re-enter Password to Confirm field.
4. Choose the OK button to save the changes.
2.6
Setting Preferences
Using the Preferences settings, you can:
■ Change the location of the working directory in which to save files
■ Change the location of the browser used to view the online help
■ Choose the fabric discovery interval. The fabric discovery interval is how
often the SANbox Manager application polls the fabric. Choose 30, 45, or 60
seconds.
■ Enable or disable the default view file auto save and load feature. Refer to
”Starting SANbox Manager” on page 2-4 for more information on the default
fabric view file.
■ Choose the default port view when opening the faceplate display. Refer to
”Monitoring Port Status” on page 5-2 for more information on port views.
Note: For UNIX uninstalls, execute the link to Uninstall_SANbox_Manager. If
no links were created during the installation, run:
$INSTALL_DIR/UninstallerData/Uninstall_SANbox_Manager. Where
INSTALL_DIR is the directory selected for installation.