Filter
Top Products
3 – Managing Fabrics
Displaying Fabric Information
3-8 59022-04 B
3.4.2
Active Zone Set Data Window
The Active Zoneset data window displays the zone membership for the active
zone set that resides on the fabric management switch. The active zone set is the
same on all switches in the fabric – you can confirm this by adding a fabric
through another switch and comparing Active Zone Set displays.
To open the Active Zoneset data window, choose the Active Zoneset tab below
the data window in the topology display. Refer to ”Configured Zonesets Data
Window” on page 4-7 for information about the zone set definitions on a particular
switch. Refer to ”Zoning a Fabric” on page 3-9 for more information about zone
sets and zones.
The Active Zoneset data window, shown in Figure 3-2, uses display conventions
for expanding and contracting entries that are similar to the fabric tree. An entry
handle located to the left of an entry in the tree indicates that the entry can be
expanded. Click this handle or double-click the following entries to expand or
contract them:
■ A zone set entry expands to show its member zones.
■ A zone entry expands to show its member ports.
■ A port entry expands to show the port Fibre Channel address.
■ A Fibre Channel address entry expands to show the port worldwide name.
Figure 3-2 Active Zone Set Data Window
Active Zoneset
Data Window