Filter
Top Products
2 – Using SANbox Manager
Using the Topology Display
2-16 59022-04 B
2.10.2
Working with Switches and Links
Switch and link icons are selectable and moveable, and serve as access points for
other displays and menus. You select switches and links to display information
about them, modify their configuration, or delete them from the display. The
context-sensitive popup menus are accessible through the switch and link icons.
2.10.2.1
Selecting Switches and Links
Selected switch icons are highlighted in violet. Selected ISLs are highlighted in
yellow. You can select switches and links in the following ways.
■ To select a switch or a link, click the icon or link.
■ To select multiple switches or links, hold down the Control key and select.
■ To select all switches or links, right-click in the graphic window background.
Select Select All Switches or Select All Links from the popup menu.
To cancel a selection, press and hold the Control key, and select the item again.
To cancel multiple selections, click in the graphic window background.
2.10.2.2
Arranging Switches in the Display
You can arrange individual switch icons in the topology display or allow SANbox
Manager to arrange all switch icons for you:
■ To move an individual switch icon, click and drag the icon to another location
in the graphic window. Links stretch or contract to remain connected.
■ To arrange all switch icons in the topology display, open the View menu and
select Layout Topology.
By default, the Toggle Auto Layout box in the View menu is checked which
allows SANbox Manager to arrange the icons when you select Layout Topology.
You can save a custom arrangement, or layout, and restore that layout during a
SANbox Manager session. Begin by arranging the icons, then open the View
menu and select Remember Layout. To restore the saved layout, open the View
menu, uncheck the Toggle Auto Layout box, and select Layout Topology.
2.10.2.3
Opening the Faceplate Display and Popup Menus
The faceplate display shows the front of a single switch and its ports.
■ To open the faceplate display when viewing the topology display, click the
switch entry/icon in the fabric tree, or double-click the switch graphic.
■ To open the fabric popup menu when viewing the topology display, right-click
the graphic window background. The fabric popup menu presents selections
to refresh the fabric, select all switches, select all links, or layout topology.