Q-Logic 8C/16 Switch User Manual


 
A Command Line Interface
Show Command
A-48 59022-04 B
The following is an example of the Show Interface command:
SANbox2 #> show interface
eth0 Link encap:Ethernet HWaddr 00:C0:DD:00:BD:ED
inet addr:10.20.68.107 Bcast:10.20.68.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4712 errors:0 dropped:0 overruns:0 frame:0
TX packets:3000 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:415313 (405.5 Kb) TX bytes:716751 (699.9 Kb)
Interrupt:11 Base address:0xfcc0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:304 errors:0 dropped:0 overruns:0 frame:0
TX packets:304 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:20116 (19.6 Kb) TX bytes:20116 (19.6 Kb)
The following is an example of the Show Port command:
SANbox2 #> show port 1
Port Number: 1
------------
AdminState Online PortID 640100
AsicNumber 0 PortWWN
AsicPort 1 RunningType Donor
ConfigType Donor SFPPartNumber PL-XPL-00-S23-00
DiagStatus Passed SFPRevision
EpConnState None SFPType 100-M5-SN-I
EpIsoReason NotApplicable SFPVendor PICOLIGHT
LinkSpeed 2Gb/s SFPVendorID 00850400
LinkState Active SymbolicName Port1
LoginStatus LoggedIn SyncStatus SyncLost
MaxCredit 0 XmitterEnabled False
OperationalState Online
ALInit 0 FlowErrors 0 PrimSeqErrors 0
ALInitError 0 FReject 0 RxLinkResets 0
Class2FramesIn 0 InvalidCRC 0 RxOfflineSeq 0
Class2FramesOut 0 InvalidDestAddr 0 TotalErrors 0
Class2WordsIn 0 LIP_AL_PD_AL_PS 0 TotalLIPsRecvd 0
Class2WordsOut 0 LIP_F7_AL_PS 0 TotalLinkResets 0
Class3FramesIn 0 LIP_F7_F7 0 TotalOfflineSeq 0