Filter
Top Products
4 – Managing Switches
Restoring the Factory Default Configuration
59022-04 B 4-21
4.11
Restoring the Factory Default Configuration
You can restore the switch and port configuration settings to the factory default
values. To restore the factory configuration on a switch, open the Switch menu
and select Restore Factory Defaults. Table 4-9 lists the factory default switch
configuration settings.
Restoring the switch to the factory default configuration does not restore the
account name and password settings. To restore the user accounts, you must
select Reset Password File option in force PROM mode menu. Refer to
"Recovering a Switch" in the Installation Guide for your switch.
Table 4-9 Factory Default Configuration Settings
Setting Value
Chassis name SANbox2
Administrative state Online
Domain ID 1
Domain ID Lock Disable
Inband Management Enable
Broadcast Support Enable
Resource Allocation Timeout (RA TOV) 10000 milliseconds
Receiver Transmitter Timeout (RT TOV) 100 milliseconds
Error Detect Timeout (ED TOV) 2000 milliseconds
IP address 10.0.0.1
Subnet mask address 255.0.0.0
Gateway address 10.0.0.254
Boot method Static
Enable Remote Logging False
Logging host IP address 10.0.0.254
Contact Undefined
Location Undefined
Trap enabled False
Trap port 162