Filter
Top Products
Appendix E - IR-IP Interface Module HCD-E1
Installation & Operation Manual
E-2 Physical Descriptionr
Application
Figure E-1 shows a typical application of HCD-E1 with the IR-IP module.
Router
HCD-E1
with IR-IP
HCD-E1
with V.35 Interface
Router
Figure E-1 Typical Application of HCD-E1 with IR-IP Module
E.2 Technical Specifications
Router
LAN IP Net
Up to 256 hosts on LAN IP net
Filtering and Forwarding
30 kbps / 35 kbps
Buffer
256 frames (maximum size – 1534 bytes)
Delay
1 frame
LAN
Standard
Conforms to IEEE 802.3/Ethernet v2
Data Rate
10 Mbps (20 Mbps 10BaseT in full duplex
topology)
Connector
10BaseT (UTP): Shielded RJ-45
WAN
Protocols
• PPP (PAP/CHAP)
• Frame Relay (RFC 1490)
• HDLC
E.3 Physical Descriptionr
Figure E-2 shows the rear panel of HCD-E1, equipped with IR-IP module.
ALM RLY
TX IN
SUB E1
RX OUT
NETWORK
LINE A
12
HDSL
LINE B
4
5
P
O
W
E
R
CHANNEL
CH.1
CH.2
10BASE-T
ERR
INT
ACT
CH.1
~100-240 VAC
0.5A T 250V
Figure E-2 Rear Panel of HCD-E1 with IR-IP Module