Filter
Top Products
HCD-E1 Installation & Operation Manual Appendix E - IR-IP Interface Module
Device Control Menu E-21
New Software
Download Menu
IR-IP operates as a TFTP client, and therefore it is possible to update its
software by downloading new software from another computer that
operates as a TFTP server.
The New Software Download menu is used to specify the software
downloading parameters.
To access the New Software Download menu:
•
From the Device Control submenu, type 1.
New Software Download menu appears (Figure E-17).
IR_IP <IR-IP> S/W Ver. 1.00 31/IR (date)
Quick Setup
Management Access
Advanced Setup
Device Control
.....................................................................
New Software Download
=====================================================================
1. Server IP Address :...............
2. File Name :...................
3. Total Timeout (sec) :..
4. Start operation :>>>
Press one of the numbers to select or ESC:
Figure E-17 New Software Download Menu
Server IP Address
Used to enter the IP address of the TFTP server.
File Name
Used to enter the name and path of the file to be transferred from the TFTP
server.
Total Timeout
Used to enter the time IP router should wait for an acknowledgment from
the TFTP server, for example 60 seconds.
Start Operation
After selecting all the necessary parameters, type 4 on the New Software
Download screen and then press <Enter> to start the downloading.
You can follow the progress of the downloading process (indicated by arrows).
Upon completion of the download process, the unit performs a reset. The
Telnet connection is lost and must be restarted if required.