Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
3) Do not turn off the Router or press the Reset button while the firmware is being
upgraded, otherwise, the Router may be damaged.
4) The Router will reboot after the upgrading has been finished.
4.15.4 Factory Defaults
Choose menu “System Tools → Factory Defaults”, and you can restore the
configurations of the Router to factory defaults on the following screen
Figure 4-75 Restore Factory Default
Click the Restore button to reset all configuration settings to their default values.
• The default User Name: admin
• The default Password: admin
• The default IP Address: 192.168.1.1
• The default Subnet Mask: 255.255.255.0
)
Note:
Any settings you have saved will be lost when the default settings are restored.
4.15.5 Backup & Restore
Choose menu “System Tools → Backup & Restore”, you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file
as shown in Figure 4-76.
Figure 4-76 Backup & Restore Configuration
¾
Click the Backup button to save all configuration settings as a backup file in your
local computer.
-106-