Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
5. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-9.
Figure 3-9 Quick Setup – Wireless
¾ Wireless Radio - Enable or disable the wireless radio choosing from the
pull-down list.
¾ SSID - Enter a value of up to 32 characters. The same name of SSID (Service
Set Identification) must be assigned to all wireless devices in your network.
Considering your wireless network security, the default SSID is set to be
rosewill_XXXXXX (XXXXXX indicates the last unique six numbers of each
Router’s MAC address). This value is case-sensitive. For example, TEST is
NOT the same as test.
¾ Region - Select your region from the pull-down list. This field specifies the
region where the wireless function of the Router can be used. It may be illegal to
use the wireless function of the Router in a region other than one of those
specified in this field. If your country or region is not listed, please contact your
local government agency for assistance.
¾ Channel - This field determines which operating frequency will be used. The
default channel is set to Auto. So the AP will choose the best channel
-25-