Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
¾ Sent Packets - Packets sent by the station
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button
to go to the next page and click the Previous button to return the previous page.
)
Note:
This page will be refreshed automatically every 5 seconds.
4.7 DHCP Setup
Figure 4-26 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-26), DHCP
Settings, DHCP Clients List and Address Reservation. Click any of them, and you will
be able to configure the corresponding function.
4.7.1 DHCP Settings
Choose menu “DHCP → DHCP Settings”, you can configure the DHCP Server on the
page as shown in Figure 4-27.The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s)
that are connected to the Router on the LAN.
-64-