Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Figure 3-5 Quick Setup
3. Click Next, and then WAN Connection Type page will appear, shown in Figure 3-6.
Figure 3-6 WAN Connection Type
The Router provides Auto-Detect function and supports three popular ways PPPoE,
Dynamic IP and Static IP to connect to the Internet. It’s recommended that you first
use of the Auto-Detect function. If you are sure of what kind of connection type your
ISP provides, you can select the very type and click Next to go on configuring.
4. If you select Auto-Detect, the Router will automatically detect the connection type
your ISP provides. Make sure one end of your cable is securely plugged into
RNX-N300RT's WAN port and your xDSL, Modem, or Ethernet's LAN port before
detection. The appropriate configuration page will be displayed when an active
Internet service is successfully detected by the Router.
1) If the connection type detected is PPPoE, the next screen will appear as shown in
Figure 3-7.
-23-