Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
automatically. It is not necessary to change the wireless channel unless you
notice interference problems with another nearby access point.
¾ Mode - This field determines the wireless mode which the Router works on.
¾ Channel Width - Select any channel width from the pull-down list. The default
setting is automatic, which can adjust the channel width for your clients
automatically.
¾ Max Tx Rate - You can limit the maximum transmission rate of the Router
through this field.
¾ Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the Router without
encryption. It is strongly recommended that you choose one of following options
to enable security.
¾ WPA-PSK/WPA2-PSK - Select WPA based on pre-shared passphrase.
z PSK Password - You can enter ASCII or Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A
to Z, the length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and
letters A to F, the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower
case keys will affect the outcome. It would also be a good idea to write down
the key and all related wireless security settings.
¾ No Change - If you chose this option, wireless security configuration will not
change!
These settings are only for basic wireless parameters. For advanced settings, please
refer to Section 4.6: “Wireless”.
6. Click the Next button. You will then see the Finish page.
If you don’t make any changes on the Wireless page, you will see the Finish page as
shown in Figure 3-10. Click the Finish button to finish the Quick Setup.
-26-