Rosewill RNWB-11001 Network Router User Manual


 
300M Wireless N Router RNX-N300RT User Manual
)
Note:
1) If you change the IP Address of LAN, you must use the new IP Address to log in the
Router.
2) If the new LAN IP Address you set is not in the same subnet, the IP Address pool of
the DHCP server will change accordingly at the same timewhile the Virtual Server
and DMZ Host will not take effect until they are re-configured.
4.5.2 WAN
Choose menu “Network WAN”, you can configure the IP parameters of the WAN on
the screen below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the
Router will automatically get IP parameters from your ISP. You can see the page as
follows (Figure 4-7):
Figure 4-7 WAN – Dynamic IP
This page displays the WAN IP parameters assigned dynamically by your ISP,
-39-