Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
¾ WPA /WPA2-Enterprise - It’s based on Radius Server.
• Version - you can choose the version of the WPA security on the pull-down list.
The default setting is Automatic, which can select WPA (Wi-Fi Protected Access)
or WPA2 (WPA version 2) automatically based on the wireless station's capability
and request.
• Encryption - You can select either Automatic, or TKIP or AES.
)
Note:
If you check the WPA/WPA2-Enterprise radio button and choose TKIP encryption, you
will find a notice in red as shown in Figure 4-20
Figure 4-20
•
Radius Server IP - Enter the IP address of the Radius server.
• Radius Port - Enter the port number of the Radius server.
• Radius Password - Enter the password for the Radius server.
• Group Key Update Period - Specify the group key update interval in seconds. The
value should be 30 or above. Enter 0 to disable the update.
¾ WPA-PSK/WPA2-PSK - It’s the WPA/WPA2 authentication type based on
pre-shared passphrase.
• Version - you can choose the version of the WPA-PSK security on the drop-down
list. The default setting is Automatic, which can select WPA-PSK (Pre-shared key
of WPA) or WPA2-PSK (Pre-shared key of WPA) automatically based on the
wireless station's capability and request.
• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can
select either Automatic, or TKIP or AES as Encryption.
)
Note:
If you check the WPA /WPA2-Personal（Recommended）radio button and choose TKIP
-58-