Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
3) How to configure Virtual Server: Log in to the Router, click the “Forwarding”
menu on the left of your browser, and click "Virtual Servers" submenu. On the
"Virtual Servers" page, click Add New…. Then on the “Add or Modify a Virtual
Server Entry” page, enter “1720” for the “Service Port” blank, and your IP
address for the “IP Address” blank, taking 192.168.1.169 for an example,
remember to Enable and Save.
Figure A-4 Virtual Servers
Figure A-5 Add or Modify a Virtual server Entry
)
Note:
Your opposite side should call your WAN IP, which is displayed on the “Status” page.
4) How to enable DMZ Host: Log in to the Router, click the “Forwarding” menu on
the left of your browser, and click "DMZ" submenu. On the "DMZ" page, click
Enable radio button and type your IP address into the “DMZ Host IP Address”
field, using 192.168.1.169 as an example, remember to click the Save button.
-116-