Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
¾ Enable Wireless Router Radio - The wireless radio of this Router can be enabled
or disabled to allow wireless stations access.
¾ Enable SSID Broadcast - When wireless clients survey the local area for wireless
networks to associate with, they will detect the SSID broadcast by the Router. If you
select the Enable SSID Broadcast checkbox, the Wireless Router will broadcast its
name (SSID) on the air.
¾ Enable WDS - Check this box to enable WDS. With this function, the Router can
bridge two or more Wlans. If this checkbox is selected, you will have to set the
following parameters as shown in Figure 4-17. Make sure the following settings are
correct
Figure 4-17
¾ SSID(to be bridged) - The SSID of the AP your Router is going to connect to as a
client. You can also use the search function to select the SSID to join.
¾ BSSID(to be bridged) - The BSSID of the AP your Router is going to connect to as
a client. You can also use the search function to select the BSSID to join.
¾ Search - Click this button, you can search the AP which runs in the current channel.
¾ Key type - This option should be chosen according to the AP's security
configuration.It is recommended that the security type is the same as your AP's
security type
-55-