Rosewill RNWB-11001 Network Router User Manual


 
300M Wireless N Router RNX-N300RT User Manual
Intervals. The default value is 1, which indicates the DTIM Interval is the same as
Beacon Interval.
¾ Enable WMM - WMM function can guarantee the packets with high-priority
messages being transmitted preferentially. It is strongly recommended.
¾ Enable Short GI - This function is recommended for it will increase the data capacity
by reducing the guard interval time.
¾ Enabled AP Isolation - This function can isolate wireless stations on your network
from each other. Wireless devices will be able to communicate with the Router but
not with each other. To use this function, check this box. AP Isolation is disabled by
default.
)
Note:
If you are not familiar with the setting items in this page, it's strongly recommended to
keep the provided default values; otherwise it may result in lower wireless network
performance.
4.6.5 Wireless Statistics
Choose menu “Wireless Wireless Statistics”, you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-25 Wireless Statistics
¾
MAC Address - The connected wireless station's MAC address
¾ Current Status - The connected wireless station's running status, one of STA-AUTH
/ STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP /
AP-DOWN / Disconnected
¾ Received Packets - Packets received by the station
-63-