Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
1. Click “Access Control → Host” in the left to enter the Host Settings page. Add a
new entry with the Host Description is Host_1 and MAC Address is
00-11-22-33-44-AA.
2. Click “Access Control → Target” in the left to enter the Target Settings page.
Add a new entry with the Target Description is Target_1 and Domain Name is
www.google.com.
3. Click “Access Control → Schedule” in the left to enter the Schedule Settings
page. Add a new entry with the Schedule Description is Schedule_1, Day is Sat
and Sun, Start Time is 1800 and Stop Time is 2000.
4. Click “Access Control → Rule” in the left to return to the Access Control Rule
Management page. Select “Enable Internet Access Control” and choose "Deny
the packets not specified by any access control policy to pass through the
Router".
5. Click Add New... button to add a new rule as follows:
z In Rule Name field, create a name for the rule. Note that this name should
be unique, for example Rule_1.
z In Host field, select Host_1.
z In Target field, select Target_1.
z In Schedule field, select Schedule_1.
z In Action field, select Allow.
z In Status field, select Enable.
z Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and see the
following list.
4.10.2 Host
Choose menu “Access Control → Host”, you can view and set a Host list in the screen
as shown in Figure 4-46. The host list is necessary for the Access Control Rule.
-83-