Rosewill RNWB-11001 Network Router User Manual


 
300M Wireless N Router RNX-N300RT User Manual
¾ Add device - You can add a new device to the existing network manually by clicking
this button.
b) To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless adapter and Router using either Push Button
Configuration (PBC) method or PIN method.
)
Note:
To build a successful connection by WPS, you should also do the corresponding
configuration of the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company
for example.
4.4.1 By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1: Press the WPS button on the front panel of the Router.
Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click Finish to complete the WPS
configuration.
-31-