300M Wireless N Router RNX-N300RT User Manual
2. Select a common application from the Common Applications drop-down list, then
the Trigger Port field and the Incoming Ports field will be automatically filled. If the
Common Applications do not have the application you need, enter the Trigger
Port and the Incoming Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list,
either TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down
list, either TCP or UDP, or All.
5. Select Enable in Status field.
6. Click the Save button to save the new rule.
Figure 4-35 Add or Modify a Port Triggering Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click
the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
-72-