Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
2) The WPS function cannot be configured if the Wireless Function of the Router is
disabled. Please make sure the Wireless Function is enabled before configuring the
WPS.
4.5 Network
Figure 4-5 Network menu
There are three submenus under the Network menu (shown in Figure 4-5): LAN, WAN
and MAC Clone. Click any of them, and you will be able to configure the corresponding
function.
4.5.1 LAN
Choose menu “Network → LAN”, you can configure the IP parameters of the LAN on the
screen as below.
Figure 4-6 LAN
¾ MAC Address - The physical address of the Router, as seen from the LAN. The
value can't be changed.
¾ IP Address - Enter the IP address of your Router or reset it in dotted-decimal
notation (factory default: 192.168.1.1).
¾ Subnet Mask - An address code that determines the size of the network. Normally
use 255.255.255.0 as the subnet mask.
-38-