Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Figure 4-40 Advanced Security
¾ Packets Statistics Interval (5~60) - The default value is 10. Select a value between
5 and 60 seconds from the drop-down list. The Packets Statistics Interval value
indicates the time section of the packets statistics. The result of the statistics is used
for analysis by SYN Flood, UDP Flood and ICMP-Flood.
¾ DoS protection - Denial of Service protection. Check the Enable or Disable button
to enable or disable the DoS protection function. Only when it is enabled, will the
flood filters be enabled.
)
Note:
Dos Protection will take effect only when the Traffic Statistics in “System Tool →
Traffic Statistics” is enabled.
¾ Enable ICMP-FLOOD Attack Filtering - Enable or Disable the ICMP-FLOOD
Attack Filtering.
¾ ICMP-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a value
between 5 ~ 3600. When the current ICMP-FLOOD Packets number is beyond the
set value, the Router will startup the blocking function immediately.
¾ Enable UDP-FLOOD Filtering - Enable or Disable the UDP-FLOOD Filtering.
-77-